2026 NEC Code Changes Update Part 2 North Dakota Electrical Continuing Education Course

2026 NEC Code Changes Update Part 2

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

Electrical Online Course Name	Credit Hours	Credit Type	Course Number	Course Availability	Course Price
2026 NEC Code Changes Update Part 2	8.0	Code	ND #26-039	3/5/2026 -through- 3/5/2027	$95 -20 $75
This North Dakota Electrical Continuing Education License Renewal Course reviews the most important National Electrical Code changes from the 2026 NEC. Continuing in Article 300 all the way through new Annex L will be covered. This course is great to learn all the new ideas from the 2026 NEC. *This course also contains a segment on North Dakota Laws, Rules, and Wiring Standards as required by the NDSEB to renew your license. Good for 8 hours of ND State Electrical Board renewal credit.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

2026 NEC Code Changes Update Part 2 Course Topics:

	•	300.24 Bends.
	•	310.10(D)Conductors Exposed to Direct Sunlight.
	•	310.12 Single-Phase Dwelling Services and Feeders.
	•	310.14(A)(2) Selection of Conductor Ampacity.
	•	310.15(E) Neutral Conductors.
	•	Ampacity Table 310.16.
	•	312.8(C) Cables Entering Cabinets Cutout Boxes and Meter Socket Enclosures.
	•	312.11(A) Splices, Taps, and Feed-Through Conductors.
	•	314.5 Nonmetallic Boxes.
	•	314.16(B) Box Fill Calculations.
	•	314.22 Surface Extensions.
	•	314.23(E) Raceway-Supported Enclosures Without Devices or Luminaires.
	•	314.23(F) Raceway-Supported Enclosures With Devices or Luminaires.
	•	314.27(B) Boxes at Ceiling-Suspended (Paddle) Fan Outlets.
	•	330.2 Listing Requirements.
	•	334.10(3) Uses Permitted.
	•	334.24 Bending Radius.
	•	336.10 Tray Cable Uses Permitted.
	•	344.29 Terminations.
	•	392.18(F) Cable Tray Access.
	•	404.1(A) Switches Covered.
	•	404.30 Switch Enclosures with Doors or Hinged Covers.
	•	406.1 Wiring Devices.
	•	406.10 Wiring Device Terminations.
	•	406.12(D) Receptacle Replacements.
	•	406.26 Tamper-Resistant Receptacles.
	•	408.6 Short-Circuit Current Rating.
	•	408.10(F) Switchboard, Switchgear, or Panelboard Identification.
	•	410 Part XI Deletion of Construction Requirements.
	•	410.184 GFCI and SPGFCI Protection for Horticultural Lighting Equipment.
	•	422.12 Central Heating Equipment.
	•	426 Part VI Conductive Pavement Heating Systems.
	•	430.98(A) Motor Control Center Marking.
	•	430.132 GFCI and SPGFCI Between Power Conversion Equipment and Motors.
	•	440.4 Marking on Hermetic Refrigerant Motor-Compressors and Equipment.
	•	440.11 HVAC Disconnecting Means.
	•	440.15 Split-System Indoor Unit Identification.
	•	445.19 Generator Remote Emergency Shutdown.
	•	450.12(A) Grounding and Bonding Dry-Type Transformer Enclosures.
	•	500.30 Bonding in Hazardous (Classified) Locations.
	•	501.15(A)(4) Class I, Division 1 Boundary Conduit Seals.
	•	501.130(C) Luminaire Retrofit Kits.
	•	512.6 Cannabis Extraction. Prohibited Locations.
	•	514.11(A) Emergency Electrical Disconnects.
	•	517.13(A) Patient Care Space Wiring Methods.
	•	517.15 Multiwire Branch Circuits.
	•	550.51(E) Surge Protection at Replacement Mobile Homes or Manufactured Homes.
	•	555.15 Servicing and Replacing of Equipment.
	•	590.6(E) Lamp Protection for Temporary Installations.
	•	600.4 Sign Markings.
	•	620.16(C) Elevator Control Panel Field Marking.
	•	620.51(E) Surge Protection.
	•	Article 624 Electric Self-Propelled Vehicle Power Transfer Systems (ESVSEs).
	•	625.5 EVSE Field Markings.
	•	625.43 EVSE Disconnecting Means.
	•	680.5(B) GFCI Protection 150 Volts or Less to Ground.
	•	680.22(B) Luminaires, Lighting Outlets, Festoon Lighting, and Ceiling Fans.
	•	680.26(B) Equipotential Bonding.
	•	680.26(B)(2) Perimeter Surfaces.
	•	680.26(B)(5) Metal Fittings and Metal Structures.
	•	690.12 Rapid Shutdown of PV Systems on Buildings.
	•	690.13 PV System Disconnecting Means.
	•	690.31(B) PV Circuit Identification and Grouping.
	•	690.47 PV System Grounding Electrode System.
	•	695.7(A) Power Wiring.
	•	700.4(F) Temporary Source of Power for Servicing of the Alternate Source of Power.
	•	700.11(D) Wiring Protection of Class 2 and Class 4 Powered Emergency Lighting Systems.
	•	700.12(G) Battery-Equipped Emergency Luminaires.
	•	705.11 Source Connections to a Service.
	•	705.13 Power Control Systems (PCSs).
	•	706.15(B) ESS Disconnecting Means Location and Control.
	•	New Chapter 7 Articles for Limited Energy System Wiring Methods and Materials.
	•	Article 725 Class 2 and Class 3 Power-Limited Circuits.
	•	Chapter 8 General Requirements for Communications Systems Outside and Entering Buildings.
	•	Annex L Proposed Organization of the 2029 National Electrical Code.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-20. Water damaged electrical equipment.
	•	24.1-06-01-30. Markings of means of egress, illumination of means of egress, and emergency lighting.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-40. (NEC 240) Overcurrent protection.
	•	24.1-06-02-40. (NEC 240) Overcurrent protection.
	•	24.1-06-02-50. (NEC 250) Grounding and bonding.
	•	24.1-06-03-01. (NEC 300) Wiring methods.
	•	24.1-06-03-14. (NEC 314) Boxes and fittings.
	•	24.1-06-04-22. (NEC 422) Appliances.
	•	24.1-06-05-01. (NEC 500) Hazardous locations.
	•	24.1-06-05-50. (NEC 550) Mobile home parks.
	•	24.1-03-01-01. Application, examination, and annual license fees.
	•	24.1-05-01-02. Fees.
	•	24.1-04-01-01. Course requirements for license renewal.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

Other ND Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course

NEC 2023 Code Changes Update Part 1	Course #: ND #23-127 Credit Type: Code	Credit Hours: 8.0 Price: $95


NEC 2023 Code Changes Update Part 2	Course #: ND #23-128 Credit Type: Code	Credit Hours: 8.0 Price: $95


2026 NEC Code Changes Update Part 1	Course #: ND #26-038 Credit Type: Code	Credit Hours: 8.0 Price: $95


2023 Grounding and Bonding	Course #: ND #23-148 Credit Type: Code	Credit Hours: 4.0 Price: $49


2023 Available Fault Current	Course #: ND #23-147 Credit Type: Code	Credit Hours: 4.0 Price: $49


Passing the Electrical Inspection	Course #: ND #23-149 Credit Type: Code	Credit Hours: 4.0 Price: $49


2023 Theory and Calculations	Course #: ND #23-150 Credit Type: Code	Credit Hours: 4.0 Price: $49


2026 NEC Code Changes Update Part 2	Course #: ND #26-039 Credit Type: Code	Credit Hours: 8.0 Price: $95

ND Electrical Continuing Education Course

2026 NEC Code Changes Update Part 2

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

About ElectricalLicenseRenewal.com

Quick Links

We are on Twitter

Happy Renewers