2026 NEC Code Changes Update Part 1 North Dakota Electrical Continuing Education Course

2026 NEC Code Changes Update Part 1

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

Electrical Online Course Name	Credit Hours	Credit Type	Course Number	Course Availability	Course Price
2026 NEC Code Changes Update Part 1	8.0	Code	ND #26-038	3/5/2026 -through- 3/5/2027	$95 -20 $75
This North Dakota Electrical Continuing Education License Renewal Course reviews the most important National Electrical Code changes from the 2026 NEC. Article 90 all the way through Article 240 will be covered. This course is great to learn all the new ideas from the 2026 NEC. *This course also contains a segment on North Dakota Laws, Rules, and Wiring Standards as required by the NDSEB to renew your license. Good for 8 hours of ND State Electrical Board renewal credit.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

2026 NEC Code Changes Update Part 1 Course Topics:

	•	Global Changes. New Articles and Structure.
	•	90.3 Code Arrangement.
	•	Article 100 Definitions. Grounding Electrode Bonding Jumper.
	•	Article 100 Definitions. Cable, Limited-Energy. (Limited-Energy Cable)
	•	Article 100 Definitions. Cable Tie. Cable Tie Fixing Device.
	•	Article 100 Definitions. Ground-Fault Circuit Interrupter, Special Purpose (SPGFCI).
	•	Article 100 Definitions. Limited-Energy System.
	•	Article 100 Definitions. Overcurrent Protective Device.
	•	Article 100 Definitions. Deletion of “Panelboard Enclosed”.
	•	Article 100 Definitions. Power Control System (PCS).
	•	Article 100 Definitions. Transformer Secondary Conductor.
	•	Article 100 Definitions. Wiring Device.
	•	110.3(A)(8). Informational Note on Cybersecurity.
	•	110.3(B) Installation and Use.
	•	110.10 Available Fault Current, Short-Circuit Current Ratings, and Other Characteristics.
	•	110.16 Arc-Flash Hazard Marking.
	•	110.26 Spaces About Electrical Equipment.
	•	110.26(A) Working Space.
	•	110.26(A)(1) Depth of Working Space.
	•	110.26(C)(2) Large Equipment.
	•	110.29 In Sight From (Within Sight).
	•	Article 120 Branch-Circuit, Feeder, and Service Load Calculations.
	•	120.5 Calculations.
	•	120.7 Power Control Systems.
	•	120.13 Branch Circuit Loads at Dwelling Units.
	•	120.54 Electric Clothes Dryers -Dwelling Units.
	•	Article 130 Energy Management Systems.
	•	Article 206 Non-Power-Limited Remote-Control and Signaling Circuits.
	•	Article 210 Branch Circuits.
	•	210.8 GFCI Protection for Personnel.
	•	210.8(A) GFCI Protection at Dwelling Units.
	•	210.8(F) GFCI Protection for Outdoor Outlets.
	•	210.12(B) AFCI Protection at Dwelling Units.
	•	210.12(C) AFCI Protection at Dormitories.
	•	210.12(E) Branch Circuit Wiring Extensions, Modifications, or Replacements.
	•	210.22 & 210.23 Permissible loads and 10-amp Branch Circuits.
	•	210.52(A)(2)(1) Dwelling Unit Receptacles and Wall Space.
	•	250.52(A)(5) Receptacle Outlet Locations Prohibited.
	•	210.52(C)(2) Island and Peninsular Countertops and Work Surfaces.
	•	250.52(C)(4) Countertops and Work Surfaces.
	•	210.63(B) Service Receptacle for Other Electrical Equipment.
	•	210.70 Lighting Outlets Required.
	•	215.12(C) Feeder Identification.
	•	215.18 Surge Protection.
	•	225.31 Disconnecting Means.
	•	225.41 Emergency Disconnects.
	•	230.46 Spliced and Tapped Conductors.
	•	230.66 Marking.
	•	230.67 Surge Protection.
	•	230.70(A)&(B) Service Disconnect Location and Marking.
	•	230.70(D) Identification of Other Source Disconnects.
	•	230.70(E) Service Equipment Replacement.
	•	230.82 Equipment Connected to the Supply Side of Service Disconnect.
	•	230.85 Deletion of Emergency Dicsonnects.
	•	230.95 Ground-Fault Protection of Equipment (GFPE).
	•	240.24(E) Overcurrent Devices in Bathrooms.
	•	250.1 & 250.4 Grounding and Bonding Scope, and General Requirements.
	•	250.8(A) Permitted Methods of Grounding and Bonding.
	•	250.64(C) Continuous GEC.
	•	250.64(G) Enclosures with Ventilation, Mounting, or Drainage Openings.
	•	250.94(A) Intersystem Bonding Termination (IBT) Devices.
	•	250.109 Metal and Nonmetallic Enclosures.
	•	250.118 Types of Equipment Grounding Conductors.
	•	Article 265 Branch Circuits Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 266 Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 267 Outside Branch Circuits and Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 268 Services Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 270 Grounding and Bonding of Systems over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	300.4(C) Damaged Conductors and Wiring Methods.
	•	300.6(E) Wiring Methods and Materials in or Under Roof Decking.
	•	300.6(G) Fittings.
	•	300.9 Raceways Exposed to Different Temperatures.
	•	300.13(B) &(C) Securing and Supporting Wiring Systems Installed Above Suspended Ceilings.
	•	300.13(E) Cable Ties Used as Means of Securement and Support.
	•	300.20 Raceway Installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-20. Water damaged electrical equipment.
	•	24.1-06-01-30. Markings of means of egress, illumination of means of egress, and emergency lighting.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-40. (NEC 240) Overcurrent protection.
	•	24.1-06-02-40. (NEC 240) Overcurrent protection.
	•	24.1-06-02-50. (NEC 250) Grounding and bonding.
	•	24.1-06-03-01. (NEC 300) Wiring methods.
	•	24.1-06-03-14. (NEC 314) Boxes and fittings.
	•	24.1-06-04-22. (NEC 422) Appliances.
	•	24.1-06-05-01. (NEC 500) Hazardous locations.
	•	24.1-06-05-50. (NEC 550) Mobile home parks.
	•	24.1-03-01-01. Application, examination, and annual license fees.
	•	24.1-05-01-02. Fees.
	•	24.1-04-01-01. Course requirements for license renewal.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

Other ND Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course

NEC 2023 Code Changes Update Part 1	Course #: ND #23-127 Credit Type: Code	Credit Hours: 8.0 Price: $95


NEC 2023 Code Changes Update Part 2	Course #: ND #23-128 Credit Type: Code	Credit Hours: 8.0 Price: $95


2026 NEC Code Changes Update Part 1	Course #: ND #26-038 Credit Type: Code	Credit Hours: 8.0 Price: $95


2023 Grounding and Bonding	Course #: ND #23-148 Credit Type: Code	Credit Hours: 4.0 Price: $49


2023 Available Fault Current	Course #: ND #23-147 Credit Type: Code	Credit Hours: 4.0 Price: $49


Passing the Electrical Inspection	Course #: ND #23-149 Credit Type: Code	Credit Hours: 4.0 Price: $49


2023 Theory and Calculations	Course #: ND #23-150 Credit Type: Code	Credit Hours: 4.0 Price: $49


2026 NEC Code Changes Update Part 2	Course #: ND #26-039 Credit Type: Code	Credit Hours: 8.0 Price: $95

ND Electrical Continuing Education Course

2026 NEC Code Changes Update Part 1

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

About ElectricalLicenseRenewal.com

Quick Links

We are on Twitter

Happy Renewers