Electrical Continuing Education &
Electrical License Renewal Services
Menu
  • Call Us Toll Free
    (855) LOG-CEUS
  • Email Us
    Support@

MT Electrical Continuing Education Course

NEC 2023 Code Changes Update - 16 Hours

Approved by the Montana State Electrical Board for Montana Electricians License Renewal.

Yes! We Are Approved by the Montana State Electrical Board for Montana Electricians' License Renewal.

Montana Electrical Board Continuing Education Provider License#: ELE-CEP-LIC-43014
Electrical Online Course Name Credit Hours Credit Type Course Number Course Availability Course Price
NEC 2023 Code Changes Update - 16 Hours16.0 Code ELE-CE-CRS-00709 8/1/2024
-through-
8/1/2026		 $119
-20
$99
This Montana Electrical Continuing Education License Renewal Course reviews the most important updated 2023 NEC Changes in detail. Course earns you 16 hours of electrical continuing education of credit type CODE for your electrical license renewal with the MT State Electrical Board. In this course we will review all of the most important National Electrical Code changes you will encounter at work. From Article 90 through Chapter 9+ is covered. This 1 course is enough to renew your Montana electrical license for 2 years
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
NEC 2023 Code Changes Update - 16 Hours Course Topics:
  • 90.5(C) Explanatory Material.
  • Article 100.
  • Article 100 Definitions. Accessible (as applied to wiring methods).
  • Article 100 Definitions. Counter (Countertop).
  • Article 100 Definitions. Likely to Become Energized.
  • Article 100 Definitions. Permanently Installed Swimming Pools and Storable Pools.
  • Article 100 Definitions. PV String Circuit.
  • Article 100 Definitions. Servicing.
  • Article 100 Definitions. Short Circuit.
  • Article 100 Definitions. Stranding.
  • Article 100 Definitions. Work Surface.
  • 110.3(A)(8) Cybersecurity.
  • 110.3(B) Installation and Use.
  • 110.16(B) Service Equipment and Feeder Supplied Equipment.
  • 110.17 Servicing and Maintenance of Equipment.
  • 110.20 Reconditioned Equipment.
  • 110.22(A) Identification of Disconnecting Means.
  • 110.26(A)(4) Limited Access.
  • 110.26(A)(6) Grade, Floor, or Working Platform.
  • 110.26(C)(2) Large Equipment.
  • 110.26(C)(3) Personnel Doors.
  • 110.26(E) Dedicated Equipment Space.
  • 110.29 In Sight From.
  • 200.6 Means of Identifying Grounded Conductors.
  • Article 210.
  • 210.4 Multiwire Branch Circuits.
  • 210.8 Ground-Fault Circuit-Interrupter Protection for Personnel.
  • 210.8(A) GFCI Protection for Dwelling Units.
  • 210.8(B) GFCI Protection for Other Than Dwelling Units.
  • 210.8(D) GFCI Protection for Specific Appliances.
  • 210.8(F) GFCI Protection for Outdoor Outlets.
  • 210.11(C)(4) Garage Branch Circuits.
  • 210.12 AFCI Protection.
  • 210.18 Branch Circuit Rating.
  • 210.19 Conductors - Minimum Ampacity and Size.
  • 210.23 Permissible Loads, Multiple-Outlet Branch Circuits.
  • 210.24 Branch Circuits - Summary.
  • 210.52(A)(2) Wall Space for Dwelling Unit Receptacle Outlets.
  • 210.52(C) Dwelling Unit Receptacle Outlets at Countertops and Work Surfaces.
  • 210.52(C)(2) & (3) Island and Peninsular Countertops and Work Surfaces.
  • 210.62 Show Windows.
  • 210.70 Lighting Outlets Required.
  • 215.15 Barriers.
  • 215.18 Surge Protection.
  • 220.1 Scope.
  • 225.41 Emergency Disconnects.
  • 230.7 Other Conductors.
  • 230.30(B) & 230.43 Wiring Methods for Service Conductors.
  • 230.67 Surge Protection.
  • 230.71(B) Two to Six Service Disconnecting Means.
  • 240.2 Reconditioned Equipment.
  • 240.4(B) Overcurrent Devices Rated 800 Amperes or Less.
  • 240.6(D) Remotely Accessible Adjustable-Trip Circuit Breakers.
  • 240.11 Selective Coordination.
  • 240.60(E) Fuse Reducers.
  • 240.89 Replacement Trip Units.
  • Article 245 Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 Volts dc.
  • 250.64(G) Enclosures with Ventilation Openings.
  • 250.68(C) Grounding Electrode Conductor Connections.
  • 250.102(C)(2) Size of SSBJ for Parallel Conductor Installations.
  • 250.118 Types of Equipment Grounding Conductors.
  • 250.130 Equipment Grounding Conductor Connections.
  • 250.140 Frames of Ranges and Clothes Dryers.
  • 300.4(E) Cables, Raceways, or Boxes Installed in or Under Metal-Corrugated Roof Decking.
  • 300.4(G) Fittings.
  • Table 300.5 Minimum Cover Requirements.
  • 300.14 Length of Free Conductors at Outlets, Junctions, and Switch Points.
  • Article 305 General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 Volts ac, 1500 Volts dc, Nominal.
  • 310.15(B)(2) Rooftop.
  • 312.8(A) Splices, Taps, and Feed-Through Conductors.
  • 312.10 Screws or Other Fasteners.
  • 312.102 Doors or Covers.
  • 314.5 Screws or Other Fasteners.
  • 314.16(B)(6) Terminal Block Fill.
  • 314.23(H)(1) Pendant Boxes.
  • 314.24(B)(4) Conductors 12 or 10 AWG.
  • 314.24(C) Clearances for Side-Wiring Entrances.
  • 314.29 Boxes, Conduit Bodies, and Handhole Enclosures to Be Accessible.
  • Article 315 Medium Voltage Conductors, Cable, Cable Joints, and Cable Terminations.
  • 320.23(A) Cables Run Across the Top of Framing Members.
  • 334.10(2) Uses Permitted.
  • 334.15(B) Protection from Physical Damage.
  • 334.19 NM Cable Entries.
  • 334.24 Bending Radius.
  • 344.28 Reaming and Threading.
  • 352.44 Expansion Fittings and Earth Movement.
  • 358.10 Uses Permitted.
  • Article 369 Insulated Bus Pipe IBP/ Tubular Covered Conductors (TCC) Systems.
  • Article 371 Flexible Bus Systems.
  • Article 400 Part IV. Portable Power Feeder Cables Over 2000 Volts, Nominal.
  • 404.30 Switch Enclosures with Doors.
  • 406.4(D)(8) Receptacle Replacements and Ground-Fault Protection of Equipment (GFPE).
  • 406.4(G) Protection of Floor Receptacles.
  • 406.6(D) Receptacle Faceplates with Integral Night Light and/or USB Charger.
  • 406.9(A) & (B) Receptacles in Damp or Wet Locations.
  • 406.9(C) Bathtub and Shower Space.
  • 406.12 Tamper-Resistant Receptacles.
  • 408.4(A) Circuit Directory or Circuit Description.
  • 408.4(B) Source of Supply.
  • 408.9 Replacement Panelboards.
  • 408.38 Enclosure.
  • 410.10(D) Bathtub and Shower Areas.
  • 410.71 Disconnecting Means for Fluorescent or LED Luminaires that Utilize Double-Ended Lamps.
  • 410.184 GFCI Protection and SPGFCI Protection.
  • Article 410 Part XVII Special Provisions for Ultraviolet Germicidal Irradiation Luminaires.
  • 422.18 Ceiling-Suspended (Paddle) Fans.
  • 424.48 Installation of Cables in Walls.
  • 430.2 Reconditioned Motors.
  • 430.52 Rating or Setting for Individual Motor Circuit.
  • 440.8 Single Machine and Location.
  • 440.11 General.
  • 440.14 Location.
  • 445.18 & 19 Disconnecting Means and Emergency Shutdown of Prime Mover.
  • 500.4 Documentation.
  • 500.7 Protection Techniques.
  • 511.7 Fixed Wiring Above Class I Locations.
  • Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
  • 517.6 Patient Care - Related Electrical Equipment.
  • 517.10(B) Areas Not Covered by Part II of Article 517.
  • 517.13 Equipment Grounding Conductor for Receptacles and Fixed Electrical Equipment in Patient Care Spaces.
  • 517.14 Panelboard Bonding.
  • 517.22 Demand Factors.
  • 518.4(B) Communications, Signaling Systems, Data Systems, Fire Alarm Systems, and Systems Less Than 120 Volts, Nominal.
  • 550.32 Service Equipment.
  • 555.15 Replacement of Equipment.
  • 555.35 Ground-Fault Protection of Equipment (GFPE) and Ground-Fault Circuit-Interrupter.
  • 625.40 Electric Vehicle Branch Circuit.
  • 630.8 Ground-Fault Circuit-Interrupter Protection for Personnel.
  • 680.5 GFCI and SPGFCI Protection.
  • 680.12 Equipment Rooms, Vaults, and Pits.
  • 680.21(D) Pool Pump Motor Replacement.
  • 680.54(C) Equipotential Bonding of Splash Pads.
  • Figure 690.1.
  • 690.4(G) PV Equipment Floating on Bodies of Water.
  • 690.12 Rapid Shutdown of PV Systems on Buildings.
  • 690.15(D) Equipment Disconnecting Means.
  • 690.31(B) Identification and Grouping.
  • 695.6(D) Fire Pump Wiring.
  • 700.11 Wiring, Class-2-Powered Emergency Lighting Systems.
  • 700.12(H) Battery-Equipped Emergency Luminaires.
  • 700.27 Class 2 Powered Emergency Lighting Systems.
  • 700.32 Selective Coordination.
  • 705.11(A) Service Connections.
  • 705.11(B), (C), and (F) Conductors and Connections.
  • Article 722 Cables for Power-Limited Circuits and Fault-Managed Power Circuits.
  • Article 724 Class 1 Power-Limited Circuits and Class 1 Power-Limited Remote-Control and Signaling Circuits.
  • 725.1 Scope.
  • 725.24 Mechanical Execution of Work.
  • 760.33 Supply-Side Overvoltage Protection.
  • Chapter 9 Notes and Tables.
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
Other MT Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course
NEC 2020 Code Changes Update - 16 Hours Banner
NEC 2020 Code Changes Update - 16 Hours
Course #: ELE-CE-CRS-00704
Credit Type: Code
Credit Hours: 16.0
Price: $119
 
NEC 2020 Code Changes Update - 8 Hours Banner
NEC 2020 Code Changes Update - 8 Hours
Course #: ELE-CE-CRS-00703
Credit Type: Code
Credit Hours: 8.0
Price: $69
 
Available Fault Current Banner
Available Fault Current
Course #: ELE-CE-CRS-00705
Credit Type: Code
Credit Hours: 4.0
Price: $49
 
NEC 2023 Code Changes Update - 16 Hours Banner
NEC 2023 Code Changes Update - 16 Hours
Course #: ELE-CE-CRS-00709
Credit Type: Code
Credit Hours: 16.0
Price: $119
 
NEC 2023 Code Changes Update - 8 Hours Banner
NEC 2023 Code Changes Update - 8 Hours
Course #: ELE-CE-CRS-00708
Credit Type: Code
Credit Hours: 8.0
Price: $69

About ElectricalLicenseRenewal.com

Electrical License Renewal Logo

We want to be your lowest priced, easiest to use, and most educational course provider. It is free to try and the cheapest. Let's renew your Electrical license together!

Quick Links

We are on Twitter

Happy Renewers

© 2024 ElectricalLicenseRenewal.com. All Rights Reserved