Grounding and Bonding International Code Council ICC Inspector Continuing Education Course

Grounding and Bonding

Approved by the International Code Council for International Code Council ICC Inspectors Certification Renewal.

Yes! We Are Approved by the International Code Council for International Code Council ICC Inspectors' Certification Renewal.

International Code Council ICC Inspector Board Continuing Education Provider License#: 2192

ICC Inspector Online Course Name	Credit Hours	Credit Type	Course Number	Course Availability	Course Price
Grounding and Bonding	4.0	ICC PPP	39804	2/7/2024 -through- 2/7/2025	$59
This online/on demand 4 Hour ICC Preferred Provider Electrical Continuing Education Course will teach you about the grounding electrodes permitted to be used and their specific installation requirements. Plus proper use of the NEC tables in Article 250. This includes grounding electrode conductor materials, installation and termination to the grounding electrode system. This course will earn you 4 hours (.4 CEUs) towards your ICC inspector credential renewal.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

Grounding and Bonding Course Topics:

	•	NEC Article 250.
	•	Grounded.
	•	Article 100 Definitions. Grounded Conductor.
	•	Grounded Conductor.
	•	Grounding Versus Bonding.
	•	Equipment Grounding Conductors.
	•	Article 100. Bonding Jumper, Main.
	•	Article 100. Bonding Jumper, Supply-Side.
	•	250.12 Clean Surfaces.
	•	250.24(B) Load-Side Grounding Connections.
	•	250.25 Grounding of Systems Permitted to Be Connected on the Supply Side of the Service Disconnect.
	•	250.28(A) Main Bonding Jumper and System Bonding Jumper Material.
	•	250.30 Grounding Separately Derived Alternating-Current Systems.
	•	250.30(A)(4)&(5) Grounding Separately Derived Alternating-Current Systems.
	•	250.30(A)(6)(a) Grounding Electrode Conductor, Multiple Separately Derived Systems.
	•	250.52 Electrodes Permitted for Grounding.
	•	250.52(A)(2) Metal In-ground Support Structure(s).
	•	250.52(B) Not Permitted for Use as Grounding Electrodes.
	•	250.53(C) Bonding Jumper.
	•	250.64(A) Aluminum or Copper-Clad Aluminum Conductors.
	•	250.64(B) Securing and Protection Against Physical Damage.
	•	250.64(B) Exposed to Physical Damage.
	•	250.64(D)(1)(3) Building or Structure with Multiple Disconnecting Means in Separate Enclosures. Common Grounding Electrode Conductor and Taps.
	•	250.64(E) Raceways, Cable Armor, and Enclosures for Grounding Electrode Conductors.
	•	250.66(A) Size of Alternating-Current Grounding Electrode Conductor.
	•	Table 250.66 Grounding Electrode Conductor for Alternating-Current Systems.
	•	250.68(C)(1) Grounding Electrode Conductor Connections. Interior Metal Water Piping.
	•	250.68(C)(2) Grounding Electrode Conductor Connections. Metal Structural Frame of a Building.
	•	250.68(C)(3) Grounding Electrode Conductor Connections.
	•	250.70 Methods of Grounding and Bonding Conductor Connection to Electrodes.
	•	250.80 Service Raceways and Enclosures.
	•	250.86 Other Conductor Enclosures and Raceways.
	•	250.94 Bonding for Communications Systems.
	•	250.102(A) Grounded Conductor, Bonding Conductors, and Jumpers.
	•	Table 250.102(C)(1). Grounded Conductor, Main Bonding Jumper, System Bonding Jumper, and Supply-Side Bonding Jumper for Alternating-Current Systems.
	•	250.104(A) Metal Water Piping.
	•	250.104(B) Bonding of Piping Systems and Exposed Structural Metal. Other Metal Piping.
	•	250.109 Metal Enclosures.
	•	250.118(A)(5)(e) Types of Equipment Grounding Conductors.
	•	250.118(B) Uses Not Permitted for Equipment Grounding Conductors.
	•	250.119 Identification of Wire-Type Equipment Grounding Conductors.
	•	NEC Table 250.122.
	•	250.122(F) Size of Equipment Grounding Conductors in Parallel.
	•	250.130(C) Replacement of Nongrounding Receptacle or Snap Switch and Branch Circuit Extensions.
	•	250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
	•	250.166 Size of the Direct-Current Grounding Electrode Conductor.
	•	250.186 Grounding Service-Supplied Alternating Current Systems.
	•	440.9 Grounding and Bonding.
	•	680.7(C) Grounding and Bonding Terminals.
	•	680.26(B)(2) Perimeter Surfaces.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

Other ICC Technicians took these icc continuing education courses with us:
Click on a banner below to go to the page for that course

2023 NEC Code Changes Update Part 1	Course #: 39802 Credit Type: ICC PPP	Credit Hours: 8.0 Price: $139


Grounding and Bonding	Course #: 39804 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $59


Passing the Electrical Inspection	Course #: 39520 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $59


Available Fault Current	Course #: 39807 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $59


2023 NEC Code Changes Update Part 2	Course #: 39803 Credit Type: ICC PPP	Credit Hours: 8.0 Price: $139


Boxes and Enclosures (Webinar)	Course #: 42389 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $75


Available Fault Current (Webinar)	Course #: 42387 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $75


Electrical Equipment Working Space (Webinar)	Course #: 42385 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $75


Electrical Theory and Calculations	Course #: 39806 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $59


Passing the Electrical Inspection (Webinar)	Course #: 42388 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $75


PV System Interconnections (Webinar)	Course #: 42390 Credit Type: ICC PPP	Credit Hours: 4.0 Price: $75

ICC ICC Inspector Continuing Education Course

Grounding and Bonding

Approved by the International Code Council for International Code Council ICC Inspectors Certification Renewal.

Yes! We Are Approved by the International Code Council for International Code Council ICC Inspectors' Certification Renewal.

About ElectricalLicenseRenewal.com

Quick Links

We are on Twitter

Happy Renewers