2026 NEC Code Changes Update Part 1 New Mexico Electrical Continuing Education Course

2026 NEC Code Changes Update Part 1

Approved by the New Mexico Construction Industries Division for New Mexico Electricians License Renewal.

Yes! We Are Approved by the New Mexico Construction Industries Division for New Mexico Electricians' License Renewal.

Electrical Online Course Name	Credit Hours	Credit Type	Course Number	Course Availability	Course Price
2026 NEC Code Changes Update Part 1	8.0	Code Change	2026-007	6/1/2026 -through- 3/18/2029	$69 -10 $59
This New Mexico Electrical Continuing Education License Renewal Course reviews the most important updated 2026 NEC Changes in detail. This course will earn you 8 hours of Code Change electrical continuing education for your electrical license renewal with the New Mexico Construction Industries Division. The NM CID has approved this course for 2026 license renewal. This course is Part 1 and reviews the top 75 sections of the most important National Electrical Code Changes in 2026; From Article 90 to Article 300. This course is best when followed by taking Part 2.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

2026 NEC Code Changes Update Part 1 Course Topics:

	•	Global Changes. New Articles and Structure.
	•	90.3 Code Arrangement.
	•	Article 100 Definitions. Grounding Electrode Bonding Jumper.
	•	Article 100 Definitions. Cable, Limited-Energy. (Limited-Energy Cable)
	•	Article 100 Definitions. Cable Tie. Cable Tie Fixing Device.
	•	Article 100 Definitions. Ground-Fault Circuit Interrupter, Special Purpose (SPGFCI).
	•	Article 100 Definitions. Limited-Energy System.
	•	Article 100 Definitions. Overcurrent Protective Device.
	•	Article 100 Definitions. Deletion of “Panelboard Enclosed”.
	•	Article 100 Definitions. Power Control System (PCS).
	•	Article 100 Definitions. Transformer Secondary Conductor.
	•	Article 100 Definitions. Wiring Device.
	•	110.3(A)(8). Informational Note on Cybersecurity.
	•	110.3(B) Installation and Use.
	•	110.10 Available Fault Current, Short-Circuit Current Ratings, and Other Characteristics.
	•	110.16 Arc-Flash Hazard Marking.
	•	110.26 Spaces About Electrical Equipment.
	•	110.26(A) Working Space.
	•	110.26(A)(1) Depth of Working Space.
	•	110.26(C)(2) Large Equipment.
	•	110.29 In Sight From (Within Sight).
	•	Article 120 Branch-Circuit, Feeder, and Service Load Calculations.
	•	120.5 Calculations.
	•	120.7 Power Control Systems.
	•	120.13 Branch Circuit Loads at Dwelling Units.
	•	120.54 Electric Clothes Dryers -Dwelling Units.
	•	Article 130 Energy Management Systems.
	•	Article 206 Non-Power-Limited Remote-Control and Signaling Circuits.
	•	Article 210 Branch Circuits.
	•	210.8 GFCI Protection for Personnel.
	•	210.8(A) GFCI Protection at Dwelling Units.
	•	210.8(F) GFCI Protection for Outdoor Outlets.
	•	210.12(B) AFCI Protection at Dwelling Units.
	•	210.12(C) AFCI Protection at Dormitories.
	•	210.12(E) Branch Circuit Wiring Extensions, Modifications, or Replacements.
	•	210.22 & 210.23 Permissible loads and 10-amp Branch Circuits.
	•	210.52(A)(2)(1) Dwelling Unit Receptacles and Wall Space.
	•	210.52(A)(5) Receptacle Outlet Locations Prohibited.
	•	210.52(C)(2) Island and Peninsular Countertops and Work Surfaces.
	•	250.52(C)(4) Countertops and Work Surfaces.
	•	210.63(B) Service Receptacle for Other Electrical Equipment.
	•	210.70 Lighting Outlets Required.
	•	215.12(C) Feeder Identification.
	•	215.18 Surge Protection.
	•	225.31 Disconnecting Means.
	•	225.41 Emergency Disconnects.
	•	230.46 Spliced and Tapped Conductors.
	•	230.66 Marking.
	•	230.67 Surge Protection.
	•	230.70(A)&(B) Service Disconnect Location and Marking.
	•	230.70(D) Identification of Other Source Disconnects.
	•	230.70(E) Service Equipment Replacement.
	•	230.82 Equipment Connected to the Supply Side of Service Disconnect.
	•	230.85 Deletion of Emergency Dicsonnects.
	•	230.95 Ground-Fault Protection of Equipment (GFPE).
	•	240.24(E) Overcurrent Devices in Bathrooms.
	•	250.1 & 250.4 Grounding and Bonding Scope, and General Requirements.
	•	250.8(A) Permitted Methods of Grounding and Bonding.
	•	250.64(C) Continuous GEC.
	•	250.64(G) Enclosures with Ventilation, Mounting, or Drainage Openings.
	•	250.94(A) Intersystem Bonding Termination (IBT) Devices.
	•	250.109 Metal and Nonmetallic Enclosures.
	•	250.118 Types of Equipment Grounding Conductors.
	•	Article 265 Branch Circuits Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 266 Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 267 Outside Branch Circuits and Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 268 Services Over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	Article 270 Grounding and Bonding of Systems over 1000 Volts ac, 1500 Volts dc, Nominal.
	•	300.4(C) Damaged Conductors and Wiring Methods.
	•	300.6(E) Wiring Methods and Materials in or Under Roof Decking.
	•	300.6(G) Fittings.
	•	300.9 Raceways Exposed to Different Temperatures.
	•	300.13(B) &(C) Securing and Supporting Wiring Systems Installed Above Suspended Ceilings.
	•	300.13(E) Cable Ties Used as Means of Securement and Support.
	•	300.20 Raceway Installations.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

Other NM Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course

2026 NEC Code Changes Update Part 1	Course #: 2026-007 Credit Type: Code Change	Credit Hours: 8.0 Price: $69


2026 NEC Code Changes Update Part 2	Course #: 2026-008 Credit Type: Code Change	Credit Hours: 8.0 Price: $69

NM Electrical Continuing Education Course

2026 NEC Code Changes Update Part 1

Approved by the New Mexico Construction Industries Division for New Mexico Electricians License Renewal.

Yes! We Are Approved by the New Mexico Construction Industries Division for New Mexico Electricians' License Renewal.

About ElectricalLicenseRenewal.com

Quick Links

We are on Twitter

Happy Renewers