Electrical Continuing Education &
Electrical License Renewal Services
Menu
  • Call Us Toll Free
    (855) LOG-CEUS
  • Email Us
    Support@

ND Electrical Continuing Education Course

NEC 2023 Code Changes Update Part 2

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

Electrical Online Course Name Credit Hours Credit Type Course Number Course Availability Course Price
NEC 2023 Code Changes Update Part 28.0 Code ND #23-128 1/17/2024
-through-
1/17/2026		 $95
-20
$75
This North Dakota Electrical Continuing Education License Renewal Course reviews the most important National Electrical Code changes from the 2023 NEC. Continuing in Article 314 all the way through Chapter 9 will be covered. This course is great to learn all the new ideas from the 2023 NEC. *This course also contains a segment on North Dakota Laws, Rules, and Wiring Standards as required by the NDSEB to renew your license. Good for 8 hours of ND State Electrical Board renewal credit.
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
NEC 2023 Code Changes Update Part 2 Course Topics:
  • 314.24(B)(4) Conductors 12 or 10 AWG.
  • 314.24(C) Clearances for Side-Wiring Entrances.
  • 314.29 Boxes, Conduit Bodies, and Handhole Enclosures to Be Accessible.
  • Article 315 Medium Voltage Conductors, Cable, Cable Joints, and Cable Terminations.
  • 320.23(A) Cables Run Across the Top of Framing Members.
  • 334.10(2) Uses Permitted.
  • 334.15(B) Protection from Physical Damage.
  • 334.19 NM Cable Entries.
  • 334.24 Bending Radius.
  • 344.28 Reaming and Threading.
  • 352.44 Expansion Fittings and Earth Movement.
  • 358.10 Uses Permitted.
  • Article 369 Insulated Bus Pipe IBP/ Tubular Covered Conductors (TCC) Systems.
  • Article 371 Flexible Bus Systems.
  • Article 400 Part IV. Portable Power Feeder Cables Over 2000 Volts, Nominal.
  • 404.30 Switch Enclosures with Doors.
  • 406.4(D)(8) Receptacle Replacements and Ground-Fault Protection of Equipment (GFPE).
  • 406.4(G) Protection of Floor Receptacles.
  • 406.6(D) Receptacle Faceplates with Integral Night Light and/or USB Charger.
  • 406.9(A) & (B) Receptacles in Damp or Wet Locations.
  • 406.9(C) Bathtub and Shower Space.
  • 406.12 Tamper-Resistant Receptacles.
  • 408.4(A) Circuit Directory or Circuit Description.
  • 408.4(B) Source of Supply.
  • 408.9 Replacement Panelboards.
  • 408.38 Enclosure.
  • 410.10(D) Bathtub and Shower Areas.
  • 410.71 Disconnecting Means for Fluorescent or LED Luminaires that Utilize Double-Ended Lamps.
  • 410.184 GFCI Protection and SPGFCI Protection.
  • Article 410 Part XVII Special Provisions for Ultraviolet Germicidal Irradiation Luminaires.
  • 422.18 Ceiling-Suspended (Paddle) Fans.
  • 424.48 Installation of Cables in Walls.
  • 430.2 Reconditioned Motors.
  • 430.52 Rating or Setting for Individual Motor Circuit.
  • 440.8 Single Machine and Location.
  • 440.11 General.
  • 440.14 Location.
  • 445.18 & 19 Disconnecting Means and Emergency Shutdown of Prime Mover.
  • 500.4 Documentation.
  • 500.7 Protection Techniques.
  • 511.7 Fixed Wiring Above Class I Locations.
  • Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
  • 517.6 Patient Care - Related Electrical Equipment.
  • 517.10(B) Areas Not Covered by Part II of Article 517.
  • 517.13 Equipment Grounding Conductor for Receptacles and Fixed Electrical Equipment in Patient Care Spaces.
  • 517.14 Panelboard Bonding.
  • 517.22 Demand Factors.
  • 518.4(B) Communications, Signaling Systems, Data Systems, Fire Alarm Systems, and Systems Less Than 120 Volts, Nominal.
  • 550.32 Service Equipment.
  • 555.15 Replacement of Equipment.
  • 555.35 Ground-Fault Protection of Equipment (GFPE) and Ground-Fault Circuit-Interrupter.
  • 625.40 Electric Vehicle Branch Circuit.
  • 630.8 Ground-Fault Circuit-Interrupter Protection for Personnel.
  • 680.5 GFCI and SPGFCI Protection.
  • 680.12 Equipment Rooms, Vaults, and Pits.
  • 680.21(D) Pool Pump Motor Replacement.
  • 680.54(C) Equipotential Bonding of Splash Pads.
  • Figure 690.1.
  • 690.4(G) PV Equipment Floating on Bodies of Water.
  • 690.12 Rapid Shutdown of PV Systems on Buildings.
  • 690.15(D) Equipment Disconnecting Means.
  • 690.31(B) Identification and Grouping.
  • 695.6(D) Fire Pump Wiring.
  • 700.11 Wiring, Class-2-Powered Emergency Lighting Systems.
  • 700.12(H) Battery-Equipped Emergency Luminaires.
  • 700.27 Class 2 Powered Emergency Lighting Systems.
  • 700.32 Selective Coordination.
  • 705.11(A) Service Connections.
  • 705.11(B), (C), and (F) Conductors and Connections.
  • Article 722 Cables for Power-Limited Circuits and Fault-Managed Power Circuits.
  • Article 724 Class 1 Power-Limited Circuits and Class 1 Power-Limited Remote-Control and Signaling Circuits.
  • 725.1 Scope.
  • 725.24 Mechanical Execution of Work.
  • 760.33 Supply-Side Overvoltage Protection.
  • Chapter 9 Notes and Tables.
  • 24.1-06-01-10. Requirements for electrical installations.
  • 24.1-06-01-10. Requirements for electrical installations.
  • 24.1-06-01-10. Requirements for electrical installations.
  • 24.1-06-01-10. Requirements for electrical installations.
  • 24.1-06-01-20. Water damaged electrical equipment.
  • 24.1-06-01-30. Markings of means of egress, illumination of means of egress, and emergency lighting.
  • 24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
  • 24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
  • 24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
  • 24.1-06-02-10. (NEC 210) Branch circuits.
  • 24.1-06-02-10. (NEC 210) Branch circuits.
  • 24.1-06-02-10. (NEC 210) Branch circuits.
  • 24.1-06-02-30. (NEC 230) Services.
  • 24.1-06-02-30. (NEC 230) Services.
  • 24.1-06-02-30. (NEC 230) Services.
  • 24.1-06-02-40. (NEC 240) Overcurrent protection.
  • 24.1-06-02-40. (NEC 240) Overcurrent protection.
  • 24.1-06-02-50. (NEC 250) Grounding and bonding.
  • 24.1-06-03-01. (NEC 300) Wiring methods.
  • 24.1-06-03-14. (NEC 314) Boxes and fittings.
  • 24.1-06-04-22. (NEC 422) Appliances.
  • 24.1-06-05-01. (NEC 500) Hazardous locations.
  • 24.1-06-05-50. (NEC 550) Mobile home parks.
  • 24.1-03-01-01. Application, examination, and annual license fees.
  • 24.1-05-01-02. Fees.
  • 24.1-04-01-01. Course requirements for license renewal.
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
Other ND Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course
NEC 2023 Code Changes Update Part 1 Banner
NEC 2023 Code Changes Update Part 1
Course #: ND #23-127
Credit Type: Code
Credit Hours: 8.0
Price: $95
 
NEC 2023 Code Changes Update Part 2 Banner
NEC 2023 Code Changes Update Part 2
Course #: ND #23-128
Credit Type: Code
Credit Hours: 8.0
Price: $95
 
Passing the Electrical Inspection Banner
Passing the Electrical Inspection
Course #: ND #23-149
Credit Type: Code
Credit Hours: 4.0
Price: $49
 
2023 Available Fault Current Banner
2023 Available Fault Current
Course #: ND #23-147
Credit Type: Code
Credit Hours: 4.0
Price: $49
 
2023 Grounding and Bonding Banner
2023 Grounding and Bonding
Course #: ND #23-148
Credit Type: Code
Credit Hours: 4.0
Price: $49
 
2023 Theory and Calculations Banner
2023 Theory and Calculations
Course #: ND #23-150
Credit Type: Code
Credit Hours: 4.0
Price: $49

About ElectricalLicenseRenewal.com

Electrical License Renewal Logo

We want to be your lowest priced, easiest to use, and most educational course provider. It is free to try and the cheapest. Let's renew your Electrical license together!

Quick Links

We are on Twitter

Happy Renewers

© 2025 ElectricalLicenseRenewal.com. All Rights Reserved