Course Main Menu

GOAL: You must answer all 15 questions, score 75% or more, and collect 0 hrs 50 mins to finish the course. *Why is this time different? You are only required to do 50 minutes per hour. This is one reason our courses are fast! Enjoy!

Progress: None Yet!

Score: None Yet!

Time: None

OR Click on a section below...

NFPA 70E is the Standard for Electrical Safety in the Workplace.

#1) NFPA 70E Purpose and Scope.

The arc flash boundary is an approach limit from an arc source at which incident energy equals 1.2 cal/cm<sup>2</sup>.

#2) NFPA 70E Article 100 Definitions.

The limited and restricted approach boundaries relate to electric shock hazards.

#3) NFPA 70E Article 100 Definitions.

For the simple lockout/tagout, a written lockout/tagout plan is not required and there is never more than one source of electrical energy.

#4) NFPA 70E 120.4(A)(4) Simple Lockout/Tagout Procedu...

When multiple disconnecting means must be locked out to perform a task, a complex lockout/tagout procedure must be used.

#5) NFPA 70E 120.4(A)(5) Complex Lockout/Tagout.

The location, sizing, and application of temporary protective grounding equipment shall be identified as part of the employer’s job planning.

#6) NFPA 70E 120.4(B)(7) Temporary Protective Groundin...

Specific items are required to be documented on the energized work permit.

#7) NFPA 70E 130.2(B) Elements of an Energized Electri...

Table 130.4(E)(a) in the NFPA 70E provides shock protection approach boundaries to exposed energized electrical conductors or circuit parts for alternating-current systems.

#8) NFPA 70E 130.4(E)(a) Shock Protection Approach Bou...

Table 130.4(E)(b) in the NFPA 70E provides shock protection approach boundaries to exposed energized electrical conductors or circuit parts for DC systems.

#9) NFPA 70E 130.4(E)(b) Shock Protection Approach Bou...

Table 130.5(C) Estimate of the Likelihood of Occurrence of an Arc Flash Incident for ac and dc Systems.

#10) NFPA 70E 130.5(C) Estimate of the Likelihood of Oc...

Table 130.5(C) Estimate of the Likelihood of Occurrence of an Arc Flash Incident for ac and dc Systems.

#11) NFPA 70E 130.5(C) Estimate of the Likelihood of Oc...

Table 130.5(C) Estimate of the Likelihood of Occurrence of an Arc Flash Incident for ac and dc Systems.

#12) NFPA 70E 130.5(C) Estimate of the Likelihood of Oc...

Table 130.7(C)(15)(a) Arc-Flash PPE Categories for Alternating Current (ac) Systems.

#13) NFPA 70E 130.7(C)(15)(a) Arc-Flash Hazard PPE Cate...

Table 130.7(C)(15)(a) Arc-Flash PPE Categories for Alternating Current (ac) Systems.

#14) NFPA 70E 130.5(C)(15)(a) Arc-Flash Hazard PPE Cate...

The worker suits up in category 1 PPE before opening the gear to perform thermography within the restricted approach boundary. Which required items are clearly missing from the workers PPE selection?

#15) NFPA 70E 130.7(C)(15)(c) Protective Clothing and P...

Thank you for choosing ElectricalLicenseRenewal.com

©2026 ElectricalLicenseRenewal.com. All Rights Reserved.