NEC 2023 Code Changes Update - 15 Hours

Approved by the New Hampshire Electricians' Board for New Hampshire Electricians License Renewal.

Yes! We Are Approved by the New Hampshire Electricians' Board for New Hampshire Electricians' License Renewal.

New Hampshire Electrical Board Continuing Education Provider License#: 0231
Electrical Online Course Name Credit Hours Credit Type Course Number Course Availability Course Price
NEC 2023 Code Changes Update - 15 Hours15.0 Code Update 0231-23 5/4/2023
-through-
5/4/2026
$139
-20

$119
This 15 Hour New Hampshire Electrical Continuing Education License Renewal Course reviews the most important National Electrical Code changes from the 2023 NEC. From Article 100 all the way through Chapter 9 will be covered. This course also contains the modules for NH Licensing Concerns, Installation Concerns, and all of the other mandatory sections for license renewal. This one course will renew your license for THREE (3) years!
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
NEC 2023 Code Changes Update - 15 Hours Course Topics:
  Global Changes.
  90.1 & 2 NEC Scope, Use and Application.
  90.4 Enforcement.
  90.5(C) Explanatory Material.
  Article 100.
  Article 100 Scope.
  Article 100 Definitions. Accessible (as applied to wiring methods).
  Article 100 Definitions. Appliance.
  Article 100 Definitions. Attachment Fitting, Weight Supporting (WSAF).
  Article 100 Definitions. Battery.
  Article 100 Definitions. Cable, Abandoned.
  Article 100 Definitions. Class 1 Circuits.
  Article 100 Definitions. Commissioning.
  Article 100 Definitions. Communications Circuit.
  Article 100 Definitions. Corrosive Environment.
  Article 100 Definitions. Counter (Countertop).
  Article 100 Definitions. Emergency Luminaire, Battery-Equipped (Battery-Equipped Emergency Luminaire).
  Article 100 Definitions. Fault-Managed Power (FMP).
  Article 100 Definitions. Ground-Fault Circuit Interrupter, Special Purpose (SPGFCI).
  Article 100 Definitions. Likely to Become Energized.
  Article 100 Definitions. Permanently Installed Swimming Pools and Storable Pools.
  Article 100 Definitions. PV String Circuit.
  Article 100 Definitions. Servicing.
  Article 100 Definitions. Short Circuit.
  Article 100 Definitions. Stranding.
  Article 100 Definitions. Unit Equipment.
  Article 100 Definitions. Work Surface.
  110.3(A)(8) Cybersecurity.
  110.3(B) Installation and Use.
  110.5 Aluminum Conductors.
  110.16(B) Service Equipment and Feeder Supplied Equipment.
  110.17 Servicing and Maintenance of Equipment.
  110.20 Reconditioned Equipment.
  110.21(A)(2) Marking of Reconditioned Equipment.
  110.22(A) Identification of Disconnecting Means.
  110.26 Spaces About Electrical Equipment.
  110.26(A)(4) Limited Access.
  110.26(A)(6) Grade, Floor, or Working Platform.
  110.26(C)(2) Large Equipment.
  110.26(C)(3) Personnel Doors.
  110.26(E) Dedicated Equipment Space.
  110.29 In Sight From.
  200.6 Means of Identifying Grounded Conductors.
  Article 210.
  210.4 Multiwire Branch Circuits.
  210.8 Ground-Fault Circuit-Interrupter Protection for Personnel.
  210.8(A) GFCI Protection for Dwelling Units.
  210.8(B) GFCI Protection for Other Than Dwelling Units.
  210.8(D) GFCI Protection for Specific Appliances.
  210.8(F) GFCI Protection for Outdoor Outlets.
  210.11(C)(4) Garage Branch Circuits.
  210.12 AFCI Protection.
  210.18 Branch Circuit Rating.
  210.19 Conductors - Minimum Ampacity and Size.
  210.23 Permissible Loads, Multiple-Outlet Branch Circuits.
  210.24 Branch Circuits - Summary.
  210.52(A)(2) Wall Space for Dwelling Unit Receptacle Outlets.
  210.52(C) Dwelling Unit Receptacle Outlets at Countertops and Work Surfaces.
  210.52(C)(2) & (3) Island and Peninsular Countertops and Work Surfaces.
  210.62 Show Windows.
  210.70 Lighting Outlets Required.
  215.15 Barriers.
  215.18 Surge Protection.
  220.1 Scope.
  225.41 Emergency Disconnects.
  230.7 Other Conductors.
  230.30(B) & 230.43 Wiring Methods for Service Conductors.
  230.67 Surge Protection.
  230.71(B) Two to Six Service Disconnecting Means.
  New Article 235.
  240.2 Reconditioned Equipment.
  240.4(B) Overcurrent Devices Rated 800 Amperes or Less.
  240.6(D) Remotely Accessible Adjustable-Trip Circuit Breakers.
  240.11 Selective Coordination.
  240.60(E) Fuse Reducers.
  240.89 Replacement Trip Units.
  Article 245 Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 Volts dc.
  250.64(G) Enclosures with Ventilation Openings.
  250.68(C) Grounding Electrode Conductor Connections.
  250.102(C)(2) Size of SSBJ for Parallel Conductor Installations.
  250.118 Types of Equipment Grounding Conductors.
  250.130 Equipment Grounding Conductor Connections.
  250.140 Frames of Ranges and Clothes Dryers.
  300.4(E) Cables, Raceways, or Boxes Installed in or Under Metal-Corrugated Roof Decking.
  300.4(G) Fittings.
  Table 300.5 Minimum Cover Requirements.
  300.14 Length of Free Conductors at Outlets, Junctions, and Switch Points.
  Article 305 General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 Volts ac, 1500 Volts dc, Nominal.
  310.15(B)(2) Rooftop.
  312.8(A) Splices, Taps, and Feed-Through Conductors.
  312.10 Screws or Other Fasteners.
  312.102 Doors or Covers.
  314.5 Screws or Other Fasteners.
  314.16(B)(6) Terminal Block Fill.
  314.23(H)(1) Pendant Boxes.
  314.24(B)(4) Conductors 12 or 10 AWG.
  314.24(C) Clearances for Side-Wiring Entrances.
  314.29 Boxes, Conduit Bodies, and Handhole Enclosures to Be Accessible.
  Article 315 Medium Voltage Conductors, Cable, Cable Joints, and Cable Terminations.
  320.23(A) Cables Run Across the Top of Framing Members.
  334.10(2) Uses Permitted.
  334.15(B) Protection from Physical Damage.
  334.19 NM Cable Entries.
  334.24 Bending Radius.
  344.28 Reaming and Threading.
  352.44 Expansion Fittings and Earth Movement.
  358.10 Uses Permitted.
  Article 369 Insulated Bus Pipe IBP/ Tubular Covered Conductors (TCC) Systems.
  Article 371 Flexible Bus Systems.
  Article 400 Part IV. Portable Power Feeder Cables Over 2000 Volts, Nominal.
  404.16 Reconditioned Equipment.
  404.30 Switch Enclosures with Doors.
  406.4(D)(8) Receptacle Replacements and Ground-Fault Protection of Equipment (GFPE).
  406.4(G) Protection of Floor Receptacles.
  406.6(D) Receptacle Faceplates with Integral Night Light and/or USB Charger.
  406.9(A) & (B) Receptacles in Damp or Wet Locations.
  406.9(C) Bathtub and Shower Space.
  406.12 Tamper-Resistant Receptacles.
  408.2 Reconditioned Equipment.
  408.4(A) Circuit Directory or Circuit Description.
  408.4(B) Source of Supply.
  408.9 Replacement Panelboards.
  408.38 Enclosure.
  408.43 Panelboard Orientation.
  410.2 Reconditioned Equipment.
  410.10(D) Bathtub and Shower Areas.
  410.71 Disconnecting Means for Fluorescent or LED Luminaires that Utilize Double-Ended Lamps.
  410.184 GFCI Protection and SPGFCI Protection.
  Article 410 Part XVII Special Provisions for Ultraviolet Germicidal Irradiation Luminaires.
  422.18 Ceiling-Suspended (Paddle) Fans.
  424.48 Installation of Cables in Walls.
  430.2 Reconditioned Motors.
  430.52 Rating or Setting for Individual Motor Circuit.
  440.8 Single Machine and Location.
  440.11 General.
  440.14 Location.
  445.18 & 19 Disconnecting Means and Emergency Shutdown of Prime Mover.
  Articles 490 & 495.
  500.4 Documentation.
  500.7 Protection Techniques.
  511.7 Fixed Wiring Above Class I Locations.
  Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
  517.6 Patient Care - Related Electrical Equipment.
  517.10(B) Areas Not Covered by Part II of Article 517.
  517.13 Equipment Grounding Conductor for Receptacles and Fixed Electrical Equipment in Patient Care Spaces.
  517.14 Panelboard Bonding.
  517.22 Demand Factors.
  518.4(B) Communications, Signaling Systems, Data Systems, Fire Alarm Systems, and Systems Less Than 120 Volts, Nominal.
  547.26 Physical Protection.
  550.32 Service Equipment.
  555.4 Location of Service Equipment.
  555.14 Equipotential Planes and Bonding of Equipotential Planes.
  555.15 Replacement of Equipment.
  555.35 Ground-Fault Protection of Equipment (GFPE) and Ground-Fault Circuit-Interrupter.
  555.36 Disconnecting Means for Shore Power Connection(s).
  625.40 Electric Vehicle Branch Circuit.
  625.42 Rating.
  625.49 Power for Systems Operating in Island Mode.
  630.8 Ground-Fault Circuit-Interrupter Protection for Personnel.
  680.5 GFCI and SPGFCI Protection.
  680.12 Equipment Rooms, Vaults, and Pits.
  680.14 Corrosive Environments.
  680.21(D) Pool Pump Motor Replacement.
  680.54(C) Equipotential Bonding of Splash Pads.
  Figure 690.1.
  690.2 Deletion of PV Output Circuit.
  690.4(F) Electronic Power Converters Mounted in Not Readily Accessible Locations.
  690.4(G) PV Equipment Floating on Bodies of Water.
  690.7 Maximum Voltage.
  690.8(A) Calculation of Maximum Circuit Current.
  690.8(D) Multiple PV String Circuits.
  690.12 Rapid Shutdown of PV Systems on Buildings.
  690.12(A) Controlled Conductors and Rapid Shutdown.
  690.12(B) Controlled Limits.
  690.12(D) Buildings with Rapid Shutdown.
  690.15(D) Equipment Disconnecting Means.
  690.31(B) Identification and Grouping.
  690.31(C)(2) Cable Tray.
  690.31(G) Over 1000 Volts DC.
  690.43(C) Equipment Grounding Conductor Location.
  695.6(D) Fire Pump Wiring.
  700.11 Wiring, Class-2-Powered Emergency Lighting Systems.
  700.12(H) Battery-Equipped Emergency Luminaires.
  700.27 Class 2 Powered Emergency Lighting Systems.
  700.32 Selective Coordination.
  705.10 Identification of Power Sources.
  705.11(A) Service Connections.
  705.11(B), (C), and (F) Conductors and Connections.
  705.11(D) and (E) Service Disconnecting Means, Bonding and Grounding.
  705.12(A) Feeders.
  705.12(A) Feeder Taps.
  706.15 Disconnecting Means.
  Article 722 Cables for Power-Limited Circuits and Fault-Managed Power Circuits.
  Article 724 Class 1 Power-Limited Circuits and Class 1 Power-Limited Remote-Control and Signaling Circuits.
  725.1 Scope.
  725.24 Mechanical Execution of Work.
  Article 726 Class 4 Fault-Managed Power Systems.
  760.33 Supply-Side Overvoltage Protection.
  800.24 Mechanical Execution of Work.
  Chapter 9 Notes and Tables.

Licensing Concerns
  NEC Adoption.
  Electrical Apprentices.
  Master and journeyman electricians.
  Continuing Education.
  Employing Electricians and Apprentices.
  Ratios of Licensees to Apprentices.

Installation Concerns
  Installation and securing of expansion fittings in runs of Rigid Polyvinyl Chloride (PVC) Conduit.
  Proper securing and supporting of raceways and cables.
  Clearances: Working Space Depth.
  Section 110.26(A)(2)
  Section 110.26(A)(3)
  The Sealing of Underground Raceways.
  Raceways Exposed to Different Temperatures.
  PVC installations subjected to physical damage.
  The Use of Flexible Cords and Cables, Article 400.
  Mini-Split Wiring.
  Type TC-ER-JP Cable.
  The Improper Connection of Septic Pumps.
  PVC Installations Subjected to Physical Damage.
  Prime Mover Shutdown for Permanently Installed Generators.
  Boxes Installed in New Construction Regarding 314.20 For Space from Combustible Surface.

NH NEC Amendments
  The use of NM cable in other structures permitted to be Types III, IV or V construction.
  NM cable in buildings or structures required to be of type I or II construction.
  Identification for Branch Circuits.
  RSA 155-A:3-c Installation of Arc-Fault Circuit Interrupters (AFCI) Exception.
New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account
Other NH Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course
NEC 2023 Code Changes Update - 15 Hours Banner
NEC 2023 Code Changes Update - 15 Hours
Course #: 0231-23
Credit Type: Code Update
Credit Hours: 15.0
Price: $139