NEC 2020 Code Changes Update Part 2 North Dakota Electrical Continuing Education Course

NEC 2020 Code Changes Update Part 2

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

Electrical Course Name	Credit Hours	Credit Type	Course Number	Course Availability	Course Price
NEC 2020 Code Changes Update Part 2	8.0	Code	ND #20-125	10/9/2020 -through- 4/30/2024	$95 -20 $75
This North Dakota Electrical Continuing Education License Renewal Course reviews the most important National Electrical Code changes from the 2020 NEC. Chapter 2 all the way through Chapter 7 will be covered. This course is great to learn all the new ideas from the 2020 NEC. *This course also contains a segment on North Dakota Laws, Rules, and Wiring Standards as required by the NDSEB to renew your license. Good for 8 hours of ND State Electrical Board renewal credit.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

NEC 2020 Code Changes Update Part 2 Course Topics:

	•	250.53(C) Bonding Jumper.
	•	250.64(A) Aluminum or Copper-Clad Aluminum Conductors.
	•	250.64(B) Exposed to Physical Damage.
	•	250.64(E) Raceways and Enclosures for Grounding Electrode Conductors.
	•	250.104(A) Metal Water Piping.
	•	250.109 Metal Enclosures.
	•	250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
	•	300.3(B)(1) Paralleled Installations.
	•	300.15(F) Fitting.
	•	310.1 Scope.
	•	310.10(B) Dry and Damp Locations.
	•	310.12 Single-Phase Dwelling Services and Feeders.
	•	310.15(B) Ambient Temperature Correction Factors.
	•	310.16 Ampacity Table.
	•	Article 311 Medium Voltage Conductors and Cable.
	•	312.6 Deflection of Conductors.
	•	314.16(B)(5) Equipment Grounding Conductor Fill.
	•	314.27(C) Boxes at Ceiling-Suspended (Paddle) Fan Outlets.
	•	314.29 Boxes, Conduit Bodies, and Handhole Enclosures to Be Accessible.
	•	330.80(C) Thermal Insulation.
	•	330.130 Hazardous (Classified) Locations.
	•	334.104 Conductors.
	•	338.2 Definitions.
	•	338.10(B)(4) Installation Methods for Branch Circuits and Feeders.
	•	350.10 Uses Permitted.
	•	366.23 Ampacity of Conductors.
	•	392.18(H) Marking.
	•	392.44 Expansion Splice Plates.
	•	392.46 Bushed Conduit and Tubing.
	•	404.14(E) Dimmer and Electronic Control Switches.
	•	406.5(G) Receptacle Orientation.
	•	406.9(C) Bathtub and Shower Space.
	•	406.12 Tamper-Resistant Receptacles.
	•	406.13 Single-Pole Separable-Connector Type.
	•	408.4(A) Circuit Directory or Circuit Identification.
	•	408.6 Short-Circuit Current Rating.
	•	408.8 Reconditioning of Equipment.
	•	408.18(C) Connections.
	•	408.43 Panelboard Orientation.
	•	410.7 Reconditioned Equipment.
	•	410.10(D) Bathtub and Shower Areas.
	•	410.69 Identification of Control Conductor Insulation.
	•	410.118 Access to Other Boxes.
	•	410 Part XVI. Special Provisions for Horticultural Lighting Equipment.
	•	410.176 Locations Not Permitted.
	•	422.5 Ground-Fault Circuit-Interrupter (GFCI) Protection for Personnel.
	•	422.16(B)(2) Built-in Dishwashers and Trash Compactors.
	•	422.16(B)(4) Range Hoods and Microwave Oven/Range Hood Combinations.
	•	440.9 Grounding and Bonding.
	•	445.18 Disconnecting Means and Emergency Shutdown.
	•	450.9 Ventilation.
	•	480.7(B) and 480.7(C) Battery System Disconnection.
	•	517.10(B) Not Covered.
	•	517.30(C) Location of Essential Electrical System Components.
	•	518.6 Illumination.
	•	Article 545 Manufactured Buildings and Relocatable Structures.
	•	590.4(G) Splices.
	•	590.8 Overcurrent Protective Devices.
	•	600.4(D) Visibility.
	•	600.6(A)(4) Disconnect. Remote Location.
	•	620.65 Signage.
	•	625.1 Scope.
	•	625.48 Interactive Systems.
	•	680.4 Inspections After Installation.
	•	680.21(C) & 680.21(D) GFCI Protection.
	•	680.22(A)(5) Pool Equipment Room.
	•	680.26(B)(2) Perimeter Surfaces.
	•	690.9(B) Device Ratings.
	•	690.12(B)(2) Rapid Shutdown. Inside the Array Boundary.
	•	690.31(C) Cables.
	•	690.31(D) Direct-Current Circuits on or in Buildings.
	•	700.12(I)(2) Installation of Unit Equipment.
	•	700.16 Emergency Illumination.
	•	705.12 Load-Side Source Connections.
	•	725.144(B) Use of Class 2-LP or Class 3-LP Cables to Transmit Power and Data.
North Dakota Laws, Rules and Wiring Standards
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-10. Requirements for electrical installations.
	•	24.1-06-01-20. Water damaged electrical equipment.
	•	24.1-06-01-30. Markings of means of egress, illumination of means of egress, and emergency lighting.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-01-40. Smoke alarms, heat alarms, fire alarm systems and carbon monoxide alarm requirements for evacuation and life safety.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-10. (NEC 210) Branch circuits.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-30. (NEC 230) Services.
	•	24.1-06-02-40. (NEC 240) Overcurrent protection.
	•	24.1-06-02-40. (NEC 240) Overcurrent protection.
	•	24.1-06-02-50. (NEC 250) Grounding and bonding.
	•	24.1-06-03-01. (NEC 300) Wiring methods.
	•	24.1-06-03-14. (NEC 314) Boxes and fittings.
	•	24.1-06-04-22. (NEC 422) Appliances.
	•	24.1-06-05-01. (NEC 500) Hazardous locations.
	•	24.1-06-05-50. (NEC 550) Mobile home parks.
	•	24.1-03-01-01. Application, examination, and annual license fees.
	•	24.1-05-01-02. Fees.
	•	24.1-04-01-01. Course requirements for license renewal.

New? First Time? Register for courses for free.

Returning For More? Sign In To Your Account

Other ND Electricians took these electrical continuing education courses with us:
Click on a banner below to go to the page for that course

NEC 2020 Code Changes Update Part 1	Course #: ND #20-124 Credit Type: Code	Credit Hours: 8.0 Price: $95


NEC 2020 Code Changes Update Part 2	Course #: ND #20-125 Credit Type: Code	Credit Hours: 8.0 Price: $95


NEC 2023 Code Changes Update Part 1	Course #: ND #23-127 Credit Type: Code	Credit Hours: 8.0 Price: $95


2020 Grounding and Bonding	Course #: ND #20-241 Credit Type: Code	Credit Hours: 4.0 Price: $49


2020 Available Fault Current	Course #: ND #20-240 Credit Type: Code	Credit Hours: 4.0 Price: $49


NEC 2023 Code Changes Update Part 2	Course #: ND #23-128 Credit Type: Code	Credit Hours: 8.0 Price: $95


2023 Available Fault Current	Course #: ND #23-147 Credit Type: Code	Credit Hours: 4.0 Price: $49


Passing the Electrical Inspection	Course #: ND #23-149 Credit Type: Code	Credit Hours: 4.0 Price: $49


2023 Theory and Calculations	Course #: ND #23-150 Credit Type: Code	Credit Hours: 4.0 Price: $49


2023 Grounding and Bonding	Course #: ND #23-148 Credit Type: Code	Credit Hours: 4.0 Price: $49

ND Electrical Continuing Education Course

NEC 2020 Code Changes Update Part 2

Approved by the North Dakota State Electrical Board for North Dakota Electricians License Renewal.

Yes! We Are Approved by the North Dakota State Electrical Board for North Dakota Electricians' License Renewal.

About ElectricalLicenseRenewal.com

Quick Links

We are on Twitter

Happy Renewers